Made for the game
Since Spalding invented the basketball back in 1894, we have been innovating to help you excel on court.
Our specialist product technicians are dedicated to designing the best possible product Spalding can offer.
Below are some tips and tricks to help you get the most out of your product, take care of it and play your best game.
Ball Inflation
To correctly inflate your basketball be sure to follow the below steps:
- All Spalding basketballs have a recommended inflation unit printed around their inflation valves i.e. 8 psi, 5 psi, 3psi etc.
- This metric pressure unit is psi (pounds/square inch). NOTE: Be careful to not confuse psi (pounds square inch) with kPa. It is a very different measurement and these are not interchangeable. (Note: 6.9 kPa = 1 psi)
- This is not a guide and should be considered a maximum. If you exceed the recommended inflation you risk damaging the basketball and also voiding the warranty.
- If you do over inflate a ball, release the pressure immediately. It may not be apparent just by looking at the ball that it is over inflated.
- Be sure to moisten the needle with water or soapy water before slowly inserting it vertically into the valve. If the needle is inserted while it is dry, it may damage the valve and cause air leakage.
- Before injecting air, be sure to inject air little by little according to the psi displayed near the ball. Please note that adding too much air may cause deformation, expansion or rupture.
- If using a hand pump make sure to place the ball on a flat surface as the needle can heat up and bend or snap off if weight is put on it.
PLAYING SURFACE
When it comes to your home court, it's important to consider what surface you'll be shooting hoops on in order to select the most appropriate Spalding product. Our basketballs are designed for specific indoor, outdoor and all-surface areas.
INDOOR
An indoor ball is designed exclusively for indoor playing surfaces. These balls are constructed with leather or high end composite covers.
INDOOR / OUTDOOR
Indoor / Outdoor basketballs are suitable for all types of playing surfaces.
Outdoor
Outdoor basketballs have a durable cover that can withstand rougher playing surfaces
Ball Material
Leather
- Full grain, premium Horween leather cover
- Initially slick out of the box, softens for superior handling once broken in
- Indoor use only
Composite
- Preferred basketball construction type
- Wide range of composite materials available across numerous price points
- Most are designed for use both indoors and outdoors
Rubber
- Highly abrasive resistant cover designed for rougher outdoor surfaces
- Unique patterns and colors available
- Designed for recreational play
FAQs
How can I ensure my basketball remains in good condition?
- Ensure to not leave your basketball out in direct sunlight or rain for extended periods of time.
- Ensure to never exceed the inflation guide situated around the inflation valve.
- Only use the ball as it was intended to be used.
How much do I pump up my basketball?
Spalding balls will have an inflation guide printed around the inflation valves of every ball. The inflation recommendation is marked in psi (pounds/square inch) and should never be exceeded.
Why shouldn’t I inflate a ball over the intended psi?
Over-inflation may damage the integrity of the ball and it will not perform to standard. Extreme over-inflation can cause the ball to explode, which may result in injury.
What ball should I choose for an outdoor court?
A rubber or durable composite leather cover is ideal for outdoor courts.
